Page 1
Scope of Supply/Bill of Material & Mounting Drawings Part Number: R-HM18-01-01-SL / R-HM18-01-02 Part Description: Head Light Guard – Royal Enfield Himalayan LS410 Applicable to Finished colour versions of Black and Silver Installation / Parts List / Bill of Material for Mounting...
MOUNTING DRAWINGS Copyright By SRC Design and Specification are subjected to change Page 2...
Page 3
Delrin (6) - 2 off, Washer M5 (7) - 2 off, and Screw M5 x 25 (8) – 2 off as shown and secure the threads, but not tighten it fully. Copyright By SRC Design and Specification are subjected to change Page 3...
Page 4
Orient the Bracket LH (5) and slide in the Delrin (6) - 2 off, Washer M5 (7) - 2 off, and Screw M5 x 25 (8) – 2 off as shown and secure the threads, but not tighten it fully. Copyright By SRC Design and Specification are subjected to change Page 4...
Page 5
Bracket RH (5) in “As Is Mounted Condition” View Showing the “As Is Mounted Condition of the Brackets Copyright By SRC Design and Specification are subjected to change Page 5...
Page 6
Orient the Head Light Guard (1) and align it to the Mounting Pin projecting out of the Brackets and Slide in the Grommet (5) – 2 off on each side and held using the Mounting Pins Copyright By SRC Design and Specification are subjected to change Page 6...
Page 7
Head Light Guard in “Final Mounted Condition” Copyright By SRC Design and Specification are subjected to change Page 7...
Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part and its functional aspects. 3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’s accessory part. It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.