Advertisement
Copyright By SRC
Design and Specification are subjected to change
Mounting Instructions
Step 1:
The Head Light Guard uses the
Mounting Holes of the Wind
Shield Guard in the Motorbike
and we start mounting the
Bracket RH (2) as shown in the
drawing.
Before Mounting the Bracket RH
(2) and Bracket LH (5), assemble
the Mounting Pin (3) and Screw
M5 x 10 (9), Off-line.
Orient the Bracket RH and slide in
the Delrin (6) - 2 off, Washer M5
(7) - 2 off, and Screw M5 x 25 (8)
– 2 off as shown and secure the
threads, but not tighten it fully.
Page 3
Advertisement
