Page 4
3. Setup tripod or mast with CM20X Crossarm. Crossarm-To-Pole Bracket CM20X Crossarm...
Page 5
4. Mount gas analyzer and sonic anemometer. Leveling Bubble CSAT3A Sonic Anemometer Head EC155 Gas Analyzer Mounting Platform CM20X Crossarm EC155 Boom Adapter...
Page 6
5. Connect EC155 and CSAT3A to EC100 Electronics. EC155 Analyzer Cable EC155 Sample Cell Cable CSAT3A Cable...
Page 7
6. Connect system plumbing. Zero Air Tubing Pump Tubing Analyzer Tubing Span Gas Tubing Pump Module Cable...
Page 8
7. Connect system wiring and insert compact flash (CF) card. Insert CF Card System Power Cable (ensure +12 Vdc power supply is off) EC100 Power and SDM Cables...
Page 9
Power Cable Power Cable to +12Vdc to EC100 Power Supply (off) EC100 SDM SDM Cable to EC100 EC100 Cable Power Cable...
Page 10
(Follow the steps from left to right, top to bottom). Press <Esc> to activate the display. Select “Sonic Azmth”. Press <Enter> to display the System Control Menu. Campbell System Control Scientific Sonic Azmth :0.00000 CR3000 Datalogger Change Press Source >...
Page 11
If your CPEC200 does not have a valve Enter in the CSAT3A sonic head module, skip to the last step. Otherwise, azimuth. select “On Site Zero & Span". System Control Modify Value Sonic Azmth :150.000 Sonic Azmth Change Press Source >...
Page 12
Select the “Span Concentrations” menu. Select “CO2”. Span Concentrations: On Site Zero & Span :0.00000 Span Concentrations > :10.0000 Do Zero False Do CO2 Span False Do H2O Span False...
Page 13
Press <Esc> twice to return to the System Enter in the CO2 span bottle Control menu. Select the “Mode” menu. concentration in ppm. Modify Value System Control Sonic Azmth :150.000 Change Press Source > Current Value: Mode :EC_off_auto_zro> 0.00000 On Site Zero & Span >...