Page 1
CPEC200 Closed Path Eddy Covariance System Quick Deploy Guide February 2016...
Page 2
1. Setup tripod and mount enclosures. Mixed Mast and Leg Mount Leg Mount CPEC200 Enclosure EC100 Enclosure CPEC200 Enclosure Pump Module EC100 Enclosure Optional Scrub Pump Module Module...
Page 4
3. Setup tripod or mast with CM20X Crossarm. Crossarm-To-Pole Bracket CM20X Crossarm...
Page 5
4. Mount the EC155 bypass tube. Mounting clip EC155 bypass tube...
Page 6
5. Mount gas analyzer and sonic anemometer. Leveling Bubble CSAT3A Sonic Anemometer Head EC155 Gas Analyzer Mounting Platform CM20X Crossarm EC155 Boom Adapter...
Page 7
6. Connect EC155 and CSAT3A to EC100 Electronics. EC155 Analyzer Cable CSAT3A Cable EC155 Sample Cell Cable...
Page 8
7. Connect system plumbing. Zero Air Tubing Pump Tubing Analyzer Tubing Span Gas Tubing Pump Module Cable...
Page 9
8. Connect system wiring and insert compact flash (CF) card. Insert CF Card System Power Cable (ensure +12 Vdc power supply is off) EC100 Power and SDM Cables...
Page 10
Power Cable Power Cable to +12Vdc to EC100 Power Supply (off) EC100 SDM SDM Cable to EC100 EC100 Cable Power Cable...
Page 11
Turn on the +12 Vdc power supply and use the datalogger keyboard display to set settings and initiate zero/span checks. 9.1 Press Esc to activate the display. Press Enter 9.2 Select Configure System. to display the System Control Menu.
Page 12
9.3 Select SONIC_AZIMU. 9.4 Enter the CSAT3A sonic head azimuth.
Page 13
9.5 If the CPEC does not have a valve module, 9.6 Select CO2_SPAN_PPM. skip to 9.10. Otherwise, select Zero/Span Config.
Page 14
9.7 Set CO2_SPAN_PPM to match the CO 9.8 Select CHECK_ZERO, SET_ZERO, CHECK_SPAN1, SET_SPAN1 in sequence. concentration of the CO span gas tank. Leave CHECK_SPAN2, CHECK_SPAN3, and CHECK_SPAN4 as FALSE unless the 6-valve module is being used.
Page 15
9.9 For each value selected on the previous 9.10 Press ESC to exit. screen, change the setting from False to True for auto zero/span.
Page 16
Please visit www.campbellsci.com to obtain contact information for your local US or International representative.