Table of Contents
Advertisement
E1.L Drive Installation and Removal
Use the button and the handle at the front of the drive to install or remove the drive from the
chassis.
Install the E1.L Drive
1. Insert the E1.L drive into the chassis.
2. Continue to push the drive back until it clicks to a stop and the handle retracts.
Remove the E1.L Drive
1. Push the button at the top of the E1.L drive to pop out the handle.
2. Grasp the handle and carefully pull the E1.L drive out of the chassis.
Chapter 3: Maintenance and Component Installation
Figure 3-8. Extending the Handle
Figure 3-9. Removing the E1.L Drive
37
Button
Handle
Advertisement
Table of Contents
