Supermicro SuperServer SSG-620P-ACR12H User Manual page 77

Figure 6-7. BIOS, Enabling CPU2 Example
6. Press [F4] to save the configuration and reboot the system and press [DEL] to enter
BIOS.
Note: Delete the RAID volume associated with the VMD controller before disabling the
controller. Failure to do so may lead to unexpected behavior."
Note: The effects of physically changing or swapping a CPU on the VMD controller
enablement has not yet been thoroughly tested or documented.
7. Switch to Advanced > Intel(R) Virtual RAID on CPU > All Intel VMD Controllers >
Create RAID Volume.
8. Set Name.
9. Set RAID Level.
Chapter 6: Optional Components
77