Table of Contents
Advertisement
STORING THE RESISTANCE SYSTEM
To store the resistance system, first remove the Curl
Pad (not shown) and the Leg Lever (not shown) from
the resistance system. Secure the Seat Carriage (44)
at the position closest to the Leg (5) (see ADJUSTING
THE SEAT on page 18). Next, remove the Storage
Knob (29) from the Row Plate (28). Lift the Leg toward
the Top Frame (37), and tighten the Storage Knob into
the side of the Row Plate and into the Rail (4).
To move the resistance system, stand behind the
Upright (2), place the toe of your shoe on the end of
the Base Plate (1), and hold the resistance system in
the indicated area. Tilt the resistance system back
onto the Wheels (65) and roll it to the new location.
WARNING:
Storage Knob (29) is in place and fully tight-
ened each time the resistance system is used.
Make sure that the
5
44
28
19
37
Hold in
this area
2
4
29
1
65
Advertisement
Table of Contents
