Table of Contents
Advertisement
MENU button back to the last menu or let the unit idle one minute to exit menu mode.
BL.O. P/T Moving
To select BL.O. P/T Moving, press the ENTER button to show the BLACKOUT WHILE
PAN/TILT MOVING on the display, use the UP/DOWN button to select No (normal while pan/tilt
moving) or Yes (blackout while pan/tilt moving), press the ENTER button to setup. Press the MENU
button back to the last menu or let the unit idle one minute to exit menu mode.
White Balance
To select White Balance, press the ENTER button to show the WHITE BALANCE on the display, use
the UP/DOWN button to select Red, Green or Blue. Once selected, press the ENTER button to
confirm, and use the UP/DOWN button to adjust the value from 125 to 255, press the ENTER
button to setup. Press the MENU button back to the last menu or let the unit idle one minute to
exit menu mode.
Cooling Mode
To select Cooling Mode, press the ENTER button to show the COOLING MODE on the
display. Use the UP/DOWN button to select Auto (Normal) or Low (Low speed). Once selected,
press the ENTER button to setup. Press the MENU button back to the last menu or let the unit idle
one minute to exit menu mode.
Dimmer Curve
To select Dimmer Curve, press the ENTER button to show the DIMMER CURVE on the
display, use the UP/DOWN button to select Linear, Square Law, Inverse Squ. or S-curve. Once
selected, press the ENTER button to store. Press the MENU button back to the last menu or let the
unit idle one minute to exit menu mode.
8D
Advertisement
Table of Contents
