Larson Electronics GL-4600-F-M-12I Instruction Manual

Visible/infrared led remote control floodlight with inline transformer

Table of Contents

Download this manual

Visible/Infrared LED Remote Control

Floodlight with Inline Transformer - 12V

Magnetic Mount

INSTRUCTION GUIDE

Part# GL-4600-F-M-12I

Congratulations

You are now the owner of one of the ﬁnest remote control searchlights available today. Thank you for

letting Larson Electronics assist you in your lighting application needs. We're proud of our products and

the technology that we've developed to ensure our customers the most durable, versatile and powerful

searchlights in the lighting industry.

Please read these instructions before using your new Remote Control Spotlight from Larson Electronics.

Table of Contents

Do you have a question about the GL-4600-F-M-12I and is the answer not in the manual?

Page 1 You are now the owner of one of the ﬁnest remote control searchlights available today. Thank you for letting Larson Electronics assist you in your lighting application needs. We're proud of our products and the technology that we've developed to ensure our customers the most durable, versatile and powerful searchlights in the lighting industry.
Page 2 The GL-4600 is a 1-Speed Searchlight with corresponding connector on the wiring harness. Directional Flexibility which gives the operator a full Next, join the leads at the remote to output side of 360° horizontal rotation and a 180° vertical tilt with inline transformer.
Page 3 » This light may only be dismantled by an authorized PARTS / ACCESSORIES Larson Electronics representative. Contact manufacturer for GL-4600 parts and accessories. » Any violation of the above referenced misuses will be considered grounds for warranty refusal...
Page 4 FLOOD LENS STABILIZATION CLIP INSTALLATION GUIDE Figure 1 1. Hook the bottom of the clip (A - Figure 1) to a middle groove on the bottom portion of the GL-4600-F Series Golight. 2. Slide the top of the clip (B - Figure 1) to a middle groove on the top portion of the Golight to complete the installation.