Larson Electronics RL-16-LED-M Instructions

PLEASE READ THESE INSTRUCTIONS BEFORE USING YOUR WORK LIGHT

WARNINGS

Lithium-ion batteries must be used and charged properly. Improper use can result in
•
serious injury, fire, or death.
NOT FOR USE IN HAZARDOUS LOCATIONS. Do not use this product in explosive
•
atmospheres, near flammable liquids, or where explosion proof or intrinsically safe
lighting is required.
DO NOT use this product in the proximity of vehicles or equipment when there is a risk
•
of flammable liquids coming into contact with the flashlight.
Light can become hot while on. To prevent damage DO NOT cover or place next to any
•
potentially flammable materials while in use.
Do not leave the battery in direct sunlight, or use or store the battery inside cars in hot
•
weather.
Do not expose the battery to water or salt water, or allow the battery to get wet.
•
Do not store the battery with metallic objects that may cause a short circuit.
•
Immediately discontinue use of the battery if the battery emits an unusual smell, feels
•
hot, changes color, changes shape or appears abnormal in any way.
Keep out of reach of children.
•
INITIAL USE
• Fully charge the unit before the first use, or if the battery is new or has been unused for
several months. The maximum charge time required is approximately 6 hours.
DAILY USE
Use only the supplied AC or DC adapter. For best performance, charge the light when it
•
starts to dim.
Connect the AC or DC adapter cord into the bottom of the light.
•
The total time to fully charge the light varies depending on the remaining charge in the
•
battery pack.
In order for the light to be waterproof, the rubber plug must be reinserted into the
•
charging port.
SAVE THESE INSTRUCTIONS