Table of Contents
Advertisement
en-us Transportation, storage and disposal
17.1 Emergency release
Releasing the door
Requirement: The drain pump is empty.
NOTICE: Escaping water may cause material damage.
1.
Do not open the door if you can see water through
▶
the glass.
Pull the emergency release downwards with a tool and
release.
a The door lock is released.
Insert the service flap and lock it into place.
2.
Close the service flap.
3.
18 Transportation, storage and dis-
Transportation, storage and disposal
posal
Transportation, storage and disposal
18.1 Removing the appliance
Turn off the faucet.
1.
Empty the water inlet hose.
2.
Switch off the appliance.
3.
→ "Switching off the appliance", Page 25
Unplug the appliance's mains plug.
4.
Drain the water.
5.
Detach the hoses.
6.
36
18.2 Inserting the transit bolts
Secure the appliance before transportation using transit
bolts in order to prevent transport damage.
Use a screwdriver to remove the 4 cover caps.
1.
Keep the cover caps.
Insert the 4 transit bolts.
2.
→ "Removing the transit bolts", Page 13
18.3 Using the appliance again
For further information, see and
▶
→ "Starting an empty washing cycle", Page 17 .
18.4 Disposal of your old appliance
Environmentally compatible disposal allows valuable raw
materials to be recycled.
WARNING
Children can lock themselves in the appliance, thereby
putting their lives at risk.
Do not install the appliance behind a door as this may
▶
obstruct the appliance door or prevent it from opening.
In the case of end-of-life appliances, pull out the power
▶
plug of the power cord, then cut through the power cord
and irreparably damage the lock on the appliance door
so as to prevent the door from closing again.
Unplug the appliance from the power supply.
1.
Cut through the power cord.
2.
Dispose of the appliance in an environmentally respon-
3.
sible manner.
Information about current disposal methods can be ob-
tained from your specialist dealer or local authority.
Advertisement
Table of Contents
