Table of Contents
Advertisement
Washer-dryer stack or free-standing
The appliance can be set up either free-standing or in a
washer-dryer stack.
WARNING
If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall.
Only stack the dryer on a washing machine using the connection kit from the dryer manufacturer . No other installation
▶
method is permitted.
Do not install the appliance in a washer-dryer stack if the dryer manufacturer does not offer a suitable connection kit.
▶
Do not install appliances from different manufacturers and with varying depths and widths in a washer-dryer stack.
▶
Do not install a washer-dryer stack on a platform; the appliances may tip over.
▶
Note: In case of set up in a washer dryer stack, please observe the requirements for the installation location.
E
H
F
G
Required space (min.)
A
B
C
D
Keep the clearance on the rear side of the appliance as small as possible, depending on the ventilation openings and the
water connection. For installation in a washer-dryer stack, a larger clearance is required at the rear of the appliance for
the dryer's ventilation openings.
Dimensions of the ventila-
tion openings (min.)
E
F
C
A
D
Both sides
Top side
Rear side
Front side
Top
Bottom
B
E
K
F
J
0.6 in.
6.3 in.
2.5 in.
2.4 in.
63.0 sq. in.
63.0 sq. in.
Installation and connection en-us
C
A
D
1.5 cm
16 cm
6.4 cm
6.1 cm
404.0 cm²
404.0 cm²
11
Advertisement
Table of Contents
