Table of Contents
Advertisement
en-us Installation and connection
Press down on the 4 cover caps.
6.
4.6 Connecting the appliance
Connecting the water inlet hoses
Connect the water inlet hose for hot water
1.
cold water
(blue) to the appliance.
14
Connect the water inlet hose for hot water
2.
cold water
If there is no faucet for hot water, only connect the wa-
ter inlet hose for cold water. Cover the hot water con-
nection on the appliance in order to protect it from dirt.
Tip: To protect against dirt, use a 3/4" end cap on the
(red) and
hot water connection of the appliance.
Open the faucets carefully and check that the connec-
3.
tion points are tight.
Water outlet connection types
This information is intended to help you to connect this ap-
pliance to the water outlet.
NOTICE:
When draining, the water drain hose is subject to water
pressure and may come loose from the installed connec-
tion point.
Secure the water drain hose against unintentional loos-
▶
ening.
Note: Observe the draining heights.
The maximum draining height is 39 in. (100 cm).
Siphon
Washbasin
Plastic pipe with rubber
sleeve or gully
(blue) to the faucet (26.4 mm = 3/4").
Secure the connection point
with a (0.94–1.57 in. (24–
40 mm)) hose clamp.
Fix and secure the water
outlet hose with an elbow.
Fix and secure the water
outlet hose with an elbow.
(red) and
Advertisement
Table of Contents
