Chapter 1 Getting Started; Introduction; System Description; System Specification - PACH & COMPANY AeGIS AFGR9 Installation And Programming Manual

Table of Contents

Advertisement

CHAPTER 1. GETTING STARTED

1.1 Introduction

Pach & Company thanks and congratulates you on the purchase of your AeGIS AFGR9 Biometric Fingerprints Reader with
26-Bit Wiegand Output.
The manual is designed to guide you through the proper programming and use of the AeGIS AFGR9. It is important for you
to read and follow the manual completely.
The Aegis AFGR9 comes with two years warranty (see warranty on previous page). We will include lightning strikes in our
two years warranty if Pach & Company surge protector (ASP1) is installed with the system.

1.2 System Description

The AeGIS AFGR9 is a Biometric Fingerprint Reader with 26-Bit Wiegand Output and 1000 Template/Access
Code Capacity. The system can be installed as a standalone, Wiegand interface with the AeGIS 9000 Series or
RS-485 using our AWCRM (AeGIS 26-Bit Wiegand Card Reader Module).
1.3 System Specifications
Standard Features
• 500 DPI Optical Finger Print Sensor.
• 1000 Template/Access-Code capacity.
• One 26-Bit wiegand Output.
• Two RS-232 (115200 Bps) for database backup and firmware upgrade.
• 2x16 character Liquid Crystal Display with backlit.
• Local Access keypad entry code.
• Standalone, Wiegand Interface or RS485 application with optional controller module (AWCRM).
• Brushed stainless steel faceplate, surface mount, indoor or outdoor.
Specifications
• Processor 8 bits CMOS, 18,432 MHz
• Real time clock.
• Memory : DATA 128 KB SRAM (volatile) with battery backup Li-Mn 3V CR2450 (3 years life time).
PROGRAM 256 KB Flash.
• Power 12VAC/DC, 12 VAC transformer is supplied.
• Current Consumption: 300 mA idle, 500 mA peak.
• Temperature range
• Two Relays 125VAC 500mA, 110VDC 200mA or 24VDC 1.0A.
• Programming port for database download and firmware upgrade.
• Dimension: 5.32" x 8.07' x 2.76" (WxHxD).
• Approximate shipping weight: 7 Lbs.
Pach and Company
AFGR9
32°F to +140°F Relative Humidity 0% to 95% non-condensing.
* Heater Pad (AHP5) is required if the ambient temperature is below 32°F.
Page 1
Chapter 1. Getting Started
07/28/04

Advertisement

Table of Contents
loading

Table of Contents