IDEAL Networks LanTEK IV Manual

Field software update procedure

Hide thumbs Also See for LanTEK IV:

LanTEK

Field Software Update Procedure

Proof of Performance

Table of Contents

Need help?

Do you have a question about the LanTEK IV and is the answer not in the manual?

Page 1 LanTEK Field Software Update Procedure Proof of Performance...
Page 2 NOTE: This update erases all user data, SYNC your LanTEK IV to AnyWARE Cloud before performing the update. From the home screen, press then upload to AnyWARE Cloud from the SYNC prompt. 1. Download the software: Download the software from: www.idealnetworks.net/support/downloads/ Format a USB stick of between 4 and 32GB on Windows PC (Fat32 format) Extract the files from the ZIP to the ROOT of USB flash drive with >3GB free space.
Page 3 2. Update main handset: • Power off LanTEK IV • Disconnect any test adapters from the LanTEK IV • Connect main handset to DC power adapter • Connect USB flash drive to main handset • Power on main handset and wait for the following screen: Power •...
Page 4 When complete, it will show this message: • Press and hold the power button for 15 seconds • Release the power button to shut down the handset • Remove the flash drive Power • Press the power button to restart the handset and complete the update procedure.
Page 5 3. Update remote handset: • Power the remote handset OFF • Disconnect any test adapters from the LanTEK IV • Connect DC power adapter to the remote handset • Connect the USB flash drive to the remote handset • Power on the remote handset then after a few seconds Tone and Talk LEDs will alternately flash green, then just the tone LED will remain steady green: •...