Items To Be Prepared; Installing The Software - Marantz PM6006 Service Manual

2. Updating via System u-com (U1001)

1. Items to Be Prepared

(1) Obtain "pcwfm3-v01l07.zip" from SDI.
(2) Personal Computer (Be installed "FUJITSU FLASH MCU Programmer for FM3/FM4").
(3) RS-232C cable (9P (Male), Straight).
(4) 8U-210100S : WRITING KIT (OLD JIG : SPK-581 WRITING KIT)
606050028012P : 7P FFC (Straight)
2. Connecting the WRITING KIT to This Unit
(1) Check that the power of this unit is off.
(2) Connect the RS-232C cable to the computer and WRITING KIT.
(3) Connect the update terminal of this unit to the WRITING KIT.
Computer
① Connect the RS-232C cable.
(Straight cable)
② Align the switch in the direction of the arrow.
5V
RESET CNVSS EPM
3.3V
Top side is contacts of
flexible card cable.
LOW
CE DSPBOOT Using the 7P FFC(Straight).
● is 1PIN side.
HIGH
→ This side is contacts of
flexible card cable.
● is 1PIN side.

3. Installing the Software

Install the writing software "FUJITSU FLASH MCU Programmer for FM3/FM4" on your computer.
(1) Download "pcwfm3-v01l07.zip" from SDI.
(2) Double-click "Setup.exe".
(3) Click "Next >".
(4) Click "Next >".
(5) Click "Finish".
39