Download Print this page

Before Operating - NOVO NOVO15WINE1 Installation Instructions & Owner's Manual

15” wine cooler

Advertisement

BEFORE OPERATING

Shipment Arriving Damaged:
VISIBLE DAMAGE
If your shipment arrives with visible damage to the box/
carton, be sure the damage is noted on the bill of freight or
express receipt and signed by the person making the delivery.
File a claim for damages immediately, regardless of the
extent of damage.
CONCEALED DAMAGES
If damages are unnoticed until the wine cooler is unpacked,
notify the transportation company or carrier immediately
and file a concealed damage claim with them. This should
be done within (5) days of the delivery date. Be sure to
hold on to the box/carton for inspection. We cannot assume
responsibility for damage or loss incurred in transit.
Important Notes:
BEFORE USING YOUR APPLIANCE
Remove the exterior and interior packing.
Before connecting the appliance to the power source, let it
stand upright for approximately 24 hours. This will reduce
the possibility of a malfunction in the cooling system from
handling during transportation. Clean the interior surface with
lukewarm water using a soft cloth. Install the handle on the
door if not already attached.
It is recommended that you install the appliance in a place
where the ambient temperature is between 61°F and 90°F
(16°C-32°C). If the ambient temperature is above or below
recommended temperatures, the performance of the unit may
be affected. For example, placing your unit in extremely cold
or hot conditions may cause interior temperatures to fluctuate.
The operating temperature range may not be reached.
CAUTION
Remove the exterior and interior packing.
Before plugging in the appliance, let it stand upright for
approximately 24 hours.
Doing this will reduce the possibility of a malfunction in
the cooling system from handling during transportation.
Clean the interior surface with lukewarm water using a
soft cloth.
Install the handle on the door if it is not already
attached (see detailed instructions below)
3
15" WINE COOLER USER MANUAL
ELECTRICAL CONNECTION
WARNING
Improper use of the grounded plug can result in electrical
shock.
This wine cooler should be properly grounded for your
safety. The power cord of this wine cooler is equipped with
a 3-prong plug which fits with a standard 3- prong wall
outlet to minimize the possibility of electrical shock.
Do not under any circumstances cut or remove the
third (ground) prong from the power cord supplied.
For personal safety, this appliance must be properly
grounded.
This appliance requires a standard 110 Volt AC 60Hz
three-prong grounded electrical outlet. Ensure that the
wall outlet and circuit have been checked by a qualified
electrician and confirmed to be properly grounded.
If only a 2-prong wall outlet is available, it is your
responsibility and obligation to have it replaced with a
properly grounded 3-prong wall outlet.
To prevent accidental injury, the cord should be secured
behind the appliance and not left exposed or dangling.
This wine cooler should always be plugged into its own
individual electrical outlet which has a voltage rating
that matches the rating label on the appliance. This will
allow the best performance and also prevent overloading
house wiring circuits that could cause a fire hazard from
overheating. Never unplug the wine cooler by pulling on
the power cord. Always grip the plug head firmly and
pull straight out from the receptacle. Immediately repair
or replace all power cords that have become frayed or
otherwise damaged. Do not use a cord that shows cracks
or abrasion damage along its length or at either end.
When moving the appliance, be careful not to damage
the power cord.

Advertisement

loading