Yamaha M7CL-48 Quick Start Manual page 16

Troubleshooting.
Are you using a mic or DI that needs +48V (phantom power)?
Go to page 9 for information about how to turn on the phantom or try a dynamic mic/passive box.
Read page 9 and still can't get phantom?
Check the global +48V master on the SETUP page (this is not scene recallable and will not reset with scene
change).
Are there any recall safes set?
This means that certain parameters of any Scene may not have been recalled because they are safe from recall
changes. For example, the channel you have chosen may have a DCA over it or there might be a patch change.
Check in CH JOB > RECALL SAFE.
I've recalled Scene 001 but some faders and other things have not reset to zero.
Are there any recall safes set? This means that aspects of Scene 001 may not have been recalled because they
are safe from recall changes. Check in CH JOB > RECALL SAFE. Clear all of these and recall Scene again.
Is SENDS ON FADER active?
This means you are pushing up an aux send and not the channel master. You can tell easily when you are in
sends on fader mode because all the green [SEL] indicators are on except the selected channel. In normal
mode, the [SEL] indicators are off and the selected channel is lit.
When I press the navigation keys, the screen changes but the faders don't copy to the chosen bank.
This is a feature often used to keep access to the DCA masters even when other banks are chosen. Press and
hold the navigation key until it flashes. Now that fader bank is locked even though the screen information
changes. To undo, just press and hold again.
The fader has stopped working!
Is SENDS ON FADER active; this means you are pushing up an aux send and not the channel master. You can
tell easily when you are in sends on fader mode because all the green [SEL] indicators are on except the
selected channel. In normal mode, the [SEL] indicators are off and the selected channel is lit.
Have you 'moved' a channel or changed the patch or both? Check the patch and the channel name/ number to
confirm they are what you expect.
MTAC STUDIO M7CL Quick Start Guide - FOR TRAINING PURPOSES
Clear all of these and recall Scene again.