Advertisement
1
Ordering the Radiator
Support
No Parts Required
Procedure
Note:
Model year 2019 and newer machines have
existing holes in the radiator support.
1.
Check if your machine has existing holes in the
radiator support
(Figure
2.
If your machine does not have existing holes,
order a radiator support, Part No. 139–0952–03,
from your authorized Toro distributor.
Front view
1. Check for existing holes
1).
Figure 1
2. Rear bumper
2
Preparing the Machine
No Parts Required
Procedure
Perform the following procedure to prepare the
machine for installing this kit.
1.
Park the machine on a level surface, disengage
the PTO, and engage the parking brake.
2.
Turn the switch to the O
key, and wait for all movement to stop before
leaving the operating position.
3.
Repair all bent or damaged areas on the
machine and replace any missing parts.
4.
Clean any debris from the machine to ease
installation.
WARNING
Long-term exposure to fuel vapors can cause
serious injury and illness.
• Avoid prolonged breathing of vapors.
• Keep face away from nozzle and gas tank
or conditioner opening.
• Keep fuel away from eyes and skin.
g287431
WARNING
In certain conditions, fuel is extremely
flammable and highly explosive. A fire or
explosion from fuel can burn you and others
and can damage property.
• Wipe up any fuel that spills.
• Never fill the fuel tank inside an enclosed
space.
• Never smoke when handling fuel, and stay
away from an open flame or where fuel
fumes may be ignited by a spark.
2
position, remove the
FF
Advertisement
