Table of Contents
Advertisement
2-2. Control Panel
2-2-1. Replacement of Rotary Encoder
2. Display Panel
(1) Remove the four knobs.
(2) Remove the exterior part of the display panel. (Refer to the section 1-2-3.)
(3) Remove the KY-323 board. (Refer to "9. KY-323 Board" in the section 1-2-5.)
(4) Remove the two screws and the VR bracket.
(5) Remove the nut of the rotary encoder to replace.
Rotary encoder
BVWH3 x 8
Knobs
VR bracket
BVWH3 x 8
Nut
(6) Install a new rotary encoder in the reverse order of the procedures (1) through (5).
2-5
DVS-7000AE MMP1
Advertisement
Table of Contents
Troubleshooting
