Table of Contents
Advertisement
http://getMANUAL.com
1-2. Control Panel
1-2-5. Installation and Removal of Boards
10. KY-324, 325 (BKDS-7032) or 395C (BKDS-7033) Board
(1) Open the panel. (Refer to the section 1-2-1.)
(2) Turn off the power switch in the control panel. (Refer to the section 1-2-2.)
(3) When removing the KY-324 or 325 board with installed to the adaptor box (BKDS-7075), remove
the two screws and the AD panel. (Refer to "3. Adaptor Box" in the section 1-2-3.)
(4) Disconnect the three connectors (CN1 through CN3).
(5) Remove the eight screws and the KY-324, 325 or 395C board.
KY-324 board
CN1
PSW3 x 8
PSW3 x 8
PSW3 x 8
CN3
CN2
PSW3 x 8
(6) Install the KY-324 or 325 board in the reverse order of the procedures (1) through (5).
1-37
DVS-7000AE MMP1
Advertisement
Table of Contents
Troubleshooting
