Table of Contents
Advertisement
Removal
(3) Open the eject levers of the plug-in board in the direction of the arrow 1.
(4) Pull out the plug-in board from the unit.
n
Pull out the plug-in board with an equal force for both eject levers.
Installation
(5) Insert the plug-in board along the board guide rails while opening the eject levers in the direction of
the arrows 1.
(6) Connect the plug-in board to the connector on the mother board by putting the eject levers in the
direction of the arrow 2.
(7) Install the two board retainer and the one board holder in the reverse order of the procedures (1) and
(2).
Eject levers
1
1
DVS-7000AE MMP1
2
2
Board guide rail
Board
1-1. DVS-7000A
1-1-3. Inserting/Pulling Out of Plug-in Boards
MB-618 board
1-5
Advertisement
Table of Contents
Troubleshooting
