Optional Blade Spacing - Toro Reelmaster 5010-H Series Operator's Manual

Optional Blade Spacing

0.50-Inch Blade Spacing for Model 03618
To change the configuration of the verticutter from the standard 0.75-inch spacing to the 0.50-inch spacing requires an
additional 34 spacers, part no. 17-1580 and an additional 10 carbide blades, part no. 106-6355, or an additional 10 regular blades
and part no. 17-1590 (Figure
1. 0.50-inch spacing
1.00-Inch Blade Spacing for Model 03619
To change the configuration of the verticutter from the standard 1.25-inch spacing to the 1.00-inch spacing requires 19 new
spacers, part no. 93-3092 and an additional 4 carbide blades, part no. 106-8625, or an additional 4 regular blades and part
no. 93-3038-03 (Figure 16).
1. 1.00-inch spacing
15).
Figure 15
2. 0.75-inch spacing
Figure 16
2. 1.25-inch spacing
14
1
2
1
2
G017456