Down Load Program - Sony CDL1100 Service Manual

6-3-5. DOWN LOAD PROGRAM

a. Connect the drive to the host computer as shown in 6-2-3-1.
b. Set the COMMAND SW of the CDL1100 (CDM-47) CONTROLLER as follows.
ID2 ID1 ID0 PARITY
H L L
c. While pressing the TEST button of the CDL1100 (CDM-47), turn on the power of the CDL1100 or power supply unit.
After about 1 second later, release the TEST button and then turn the computer on.
d. After system loading, insert Firmware Program Disk into the drive A.
e. Change the directory in the drive A.
f. Type G O and hit Enter key. (Display 6-3-5. (a) shows up.)
Firmware DownLoad VIA ASPI Ver.1.00.00 --Sony CD-ROM --
[ID:7]=ASW-1210 V 3.60 ADAPTEC AHA-1520ADAPTEC AHA-1520
Size of OBJ. [415s_XXx. HEX ] => 065536 Bytes. Accept? (Y/N) ==>?
g. Hit Y key. (Display 6-3-5. (b) shows up.)
Firmware DownLoad VIA ASPI Ver.1.00.00 --Sony CD-ROM --
[ID:7]=ASW-1210 V 3.60 ADAPTEC AHA-1520ADAPTEC AHA-1520
Size of OBJ. [415s_XXx. HEX ] => 065536 Bytes.
[ID:3]=SONY CD-ROM CDU-415 X.Xx
h. Hit Y key.
i. Hit Enter key to start the down loading.(It takes a few minutes). (Display 6-3-5. (c) shows up.)
Firmware DownLoad VIA ASPI Ver.1.00.00 --Sony CD-ROM --
[ID:7]= ASW-1210 V 3.60 ADAPTEC AHA-1520ADAPTEC AHA-1520
Size of OBJ. [415s_XXx. HEX ] => 065536 Bytes.
[ID:3]= SONY
[ID:3] Downloading INQUITY data.
[ID:3] Downloading ROM data. [00000 ~03FFF]
[ID:3] Downloading ROM data. [04000 ~07FFF]
[ID:3] Downloading ROM data. [08000 ~0BFFF]
Note: When the firmware has the different inquiry data from the current drive, the warning message appears. (Display 6-3-5. (d) shows up.)
Inthis case, hit ESC key to quit.
L
CD-ROM CDU-415 X.Xx
Display 6-3-5 (a)
[Available ROM size:064 kBytes)
Accept? (Y/N) ==>?
Display 6-3-5 (b)
[ID:3]=SONY
Display 6-3-5 (c)
6-20
[Nov. -21-1996]
[Nov. -21-1996]
[Nov. -21-1996]
CD_ROM CDU-415 X.Xx
Complete.
Complete.
Complete.
Wait for a moment...