Download Print this page

Sony CDL1100 Service Manual

Cd-rom library system.
Hide thumbs

Advertisement

SERVICE MANUAL
For Primary Service
The 40 series has been added to the CDL1100. Use this manual together with the service manual already distributed (SUPPLEMENT-1).
SUPPLEMENT-2
File this supplement with the service manual.
SUBJECT : 1. ADDITIONS CDL1100-40 SERIES
2. CHANGES IN MECHANICAL ADJUSTMENT
MODEL IDENTIFICATION
— SPECFICATION LABEL —
SONY
CD-ROM LIBRARY
CDL1100
CDL1100-
MODEL NO
-2
: 20 series
-4
: 40 series
(ENG-99001)
1

Advertisement

   Also See for Sony CDL1100

   Related Manuals for Sony CDL1100

   Summary of Contents for Sony CDL1100

  • Page 1

    File this supplement with the service manual. SUBJECT : 1. ADDITIONS CDL1100-40 SERIES 2. CHANGES IN MECHANICAL ADJUSTMENT (ENG-99001) The 40 series has been added to the CDL1100. Use this manual together with the service manual already distributed (SUPPLEMENT-1). MODEL IDENTIFICATION — SPECFICATION LABEL — SONY...

  • Page 2

    OUTLINE AND SPECIFICATIONS OF THE CDL1100- 40 SERIES The CDL1100-40 series is a CD-ROM library system with two 24x(MAX). It incorporates the compact feature of the CDL1100-20 series. The main specifications are as follows. SPECIFICATIONS CDL1100-40 series (* indicates the differences from the CDL1100- 20 series.)

  • Page 3

    TABLE OF CONTENTS List of For Primary Service Contents G: Need not refer Page No: Added, Refer to on page —: Not applicable MODEL CDL1100-20 Series CDL1100-40 Series Section ORIGI- SUPPLE- SUPPLE- ORIGI- SUPPLE- SUPPLE- EDITION MENT-1 MENT-2 MENT-1 MENT-2 SPECIFICATIONS —...

  • Page 4

    MODEL CDL1100-20 Series CDL1100-40 Series Section ORIGI- SUPPLE- SUPPLE- ORIGI- SUPPLE- SUPPLE- EDITION MENT-1 MENT-2 MENT-1 MENT-2 FIELD REPAIR Preparations — — — — Removing/Replacing the the FRU — — — — 5-2-1 Removing the Left Panel — — —...

  • Page 5

    FRU (FIELD REPLACEABLE UNITS) LISTING OF REMOVAL Time of CDL1100-20 CDL1100-40 Edition and page Describing Parts No. Replacement Series Series Replacement Method (Typ. min.) Main Mounted Boad,Complete A-4699-367-A Orig.5-9,Spl. (1) 13 Power Supply Mounted Boad,Complete A-4699-382-A Orig.5-8 Front Assembly A-4672-420-A Orig.5-3...

  • Page 6

    6-20, -21E of the CDL1100 SERVICE MANUAL Technical Service ORIGINAL (9-920-921-81), or re- fer to pages 23, 24, of the CDL1100 SERVICE MANUAL Tech- nical Service SUPPLEMENT-2. 2. Pay careful attention when connecting the CNJ202 connector of the drive unit (CDM-47, CDM-57).

  • Page 7

    3-2-4. Drive Unit (CDM-57) • CANCEL FUNCTION OF INBALANCED DISC 1 Adoption of VCAN (Vibration Cancel) motor for the • P-CAV DRIVE spindle By using latest P-CAV (partial CAV) technology, the CDM-57 real- CDM-57 has new type of spindle motor that cancels imbalance of a izes data transferring with variable transfer rate, from 12* (inner track) disc automatically.

  • Page 9

    5-2-8. Replacing the CDM-47/57 Drive Unit 5. Remove the screw on the right side of the unit, and remove the unit. NOTE: Set to the Park state before replacing. 6. Attach the new separate drive unit, tighten the screw on the right side, and tighten the screw on the left side with the ground wires.

  • Page 10

    18. The display panel shows “[CA?184]CS=2208. Part. No Description 19. Press the DISP button on the SERVICE board. J-2501-118-A CDL1100 Height adjusting tool The display panel will show “CA?184[CS=2208]”. 20. Press the tool vertically from the top very lightly, and slide the...

  • Page 11

    22. Perform procedure 20 and 21. If the tool gets caught at both 37. If the offset value E obtained at procedure 33 is “+”, press the sides, press the ELVUP button on the SERVICE board once to ELVUP button the number of times corresponding to the offset raise the carrier by one step, and repeat from procedure 20.

  • Page 12: Sony Corporation

    CDL1100 • When moving the carrier by address or detecting the reset posi- • If the tool does not get caught by the rib at both the left and right tion, remove the tool and then execute it to prevent unintentional sides immediately after the carrier is moved to the adjustment ad- accidents.

Comments to this Manuals

Symbols: 0
Latest comments: