Toshiba RAV-HM561KRTP Series Service Manual page 102

No. Part name
Electric part
4
box assembly
PMV cover fixing screw
Electric part cover
TC1 sensor
TC2 sensor
6) Remove the earth screw and earth line from
evaporator.
7) Disconnect the connectors for the fan motor,
louver motor and PMV motor from P.C. board
assembly.
8) Remove the 2 fixing screws that secures the
electric parts box assembly, unit display
assembly and remove the electric parts box
assembly.
Procedures
1) Follow the procedure item 3 .
2) Remove screw holding the electric part cover.
3) Take off the clamp base mounting screw and
then remove the clamp base assembly.
4) Take off fixing screws (2 pcs) of PMV
cover, and then remove PMV cover.
Screw
5) Pull out TC1, TC2, TCJ sensors from sensor
holder of hear exchanger.
(Pay attention to mounting positions of each
sensor when reassembling of electric parts. Be
sure to apply marking, etc to TC2 and TCJ
sensors before removing because their shapes
are reassembled.)
PMV cover
Clamp base assembly
Screw
TCJ sensor
- 102 -
Remarks
Fan motor connector
Louver motor connector
PMV motor connector
Earth screw
Electric parts box
Screw
Screw
Unit display