Table of Contents
Advertisement
User Menu
Copy
2
Copy Data to Copy 1 Drive
1
1 + 2
Set Copy 1 Drive
3
1. Set the camera number to be copied.
step
• The button function changes between "All Off"
and "All On" each time you select this button. You
can switch on and off for all the cameras easily
by using this button.
• The picture is not copied when there is no
recorded picture of the set camera number or
time.
2. Select "Other settings" and then set the detailed
step
settings.
From Main: Sets the area which contains the data
to be copied. The available setting items are
"Normal," "Alarm," and "LPA."
To Copy 1: Sets the group name to where the data
is copied. The available setting items are
"SerialBus," "NAS," "SCSI," "DVD/CD," and
"USBMemory." Set this unit to "SerialBus."
Copy Data: Sets the data area to be copied. The
available setting items are "Alarm" and "All."
Overwrite: Selects whether or not to overwrite the
existed data.
Auto Eject: Selects whether to eject media
automatically when the copy is over. This menu is
not available for this unit.
• "Alarm" appears for "From Main" when "Alarm
Recording Area" (System Menu
Management Setting for Main Memory
Partition Setting) is set to other than "0 %" in the
recorder.
• "LPA" appears for "From Main" when "Long Pre-Alarm
Area" (System Menu Memory Data Management
Setting for Main Memory Change Partition Setting)
is set to other than "0 %" in the recorder.
3. Set the start, start/end, or end points of copy by
step
specifying the date and time or the book mark
number.
Start: Sets only the start point of copy.
Start/End: Sets the start and end points of copy.
End: Sets only the end point of copy.
• To set the book mark point, select "Bookmark"
and then select the desired book mark number.
• To copy from the oldest recording time, select
"Copy Start Time." To copy to the latest recording
time, select "Copy End Time."
4. Select "Execute."
step
• The copy starts.
• To stop the copy manually, select "Cancel" in the
progress screen. The data which has been copied
before cancelling is copied.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Range of Copy
Memory
Copy 2
This item is used to copy the data by specifying only the
start point. The point is specified by the date and time or
4
step
the bookmark. The copy continues until the end point of
the recording data reaches or the media to be copied be-
comes full unless the copy is stopped manually (when "FIFO
3
step
Overwrite" is set to "Off"). This function is useful for making
backup of the recording data.
1, 2
steps
• Before executing the copy, make sure that the
recorder and this unit are connected and the <Add/
Remove HDD Device> (System Menu Memory) is
set in the recorder correctly.
User Menu
2
Copy
2
Copy Data to Copy 2 Drive
Set Copy 2 Drive
4
1. Set the camera number to be copied.
step
• The button function changes between "All Off"
and "All On" each time you select this button. You
can switch on and off for all the cameras easily
by using this button.
• The picture is not copied when there is no
recorded picture of the set camera number or
time.
2. Select "Other settings" and then set the detailed
step
settings.
From Main: Sets the area which contains the data
Data
to be copied. The available setting items are
Change
"Normal," "Alarm," and "LPA."
To Copy 2: Sets the group name to where the data
is copied. The available setting items are
"SerialBus," "NAS," "SCSI," and "DVD/CD." Set this
unit to "SerialBus."
Copy Data: Sets the data area to be copied. The
available setting items are "Alarm" and "All."
Overwrite: Selects whether or not to overwrite the
existed data.
Auto Eject: Selects whether to eject media
automatically when the copy is over. This menu is
not available for this unit.
FIFO Overwrite: Selects whether to repeat copying
from the start point of the media by overwriting the
existed data, or to stop copying when the capacity
of the media becomes full during copying.
• "Alarm" appears for "From Main" when "Alarm
Recording Area" (System Menu
Management Setting for Main Memory
Partition Setting) is set to other than "0 %"
in the recorder.
1 + 2
Range of Copy
Memory
4
step
3
step
1, 2
steps
Data
Change
9
Advertisement
Table of Contents
