Mitsubishi Electric DX-ZD5UEZ Installation And Operation Manual page 15

Hdd extension unit
Hide thumbs Also See for DX-ZD5UEZ:
Table of Contents

Advertisement

2. Remove the screws.
step
3. Remove the front covers.
step
• Remove the cover on the right side first.
• Then, push the left side cover to the right to
remove.
4. Disconnect the cord connected to the circuit board
step
on the metal part.
5. Remove the metal part.
step
• Remove 4 screws on the metal part.
6. Pull out the HDD tray completely.
step
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
HDD 2
HDD 1
7. Attach the new HDD onto the HDD tray with four
step
screws.
• Make sure to attach the HDD in the correct
direction.
• When attaching the HDD to this unit, use the supplied
screws.
8. Insert the hard disk tray halfway.
step
9. Connect the cords.
step
10. Insert the hard disk tray completely.
step
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dx-zd5ue(z)

Table of Contents