Controlling Other Components Using The Aux Button - Mitsubishi SR-SDI Owner's Manual

PROGRAMMING YOUR REMOTE CONTROL

Controlling Other Components Using the AUX Button

Some additional features are available when the remote control is in the AUX mode.
Volume Control in AUX Mode
Note that when the remote control is in TV, VCR, or SAT mode, the volume keys control the sound
volume for the television. When you're in AUX mode, if your auxiliary component has audio output,
the volume keys control that component's sound volume. If your auxiliary component doesn't have
audio output, you can program the volume button so that it continues to control the TV volume when
your remote control is in AUX mode:
1.
Press the "AUX" key and the "Mute" key simultaneously.
2.
Press the "Volume Up" key.
Once you perform these steps, whenever your remote control is in AUX mode the volume keys will
control the television volume. In the event that you reprogram the "AUX" key to control a different
component at some future time, you can restore the remote control's capability to control the auxiliary
component's volume by simply repeating these two steps.
Assigning a Device to a Different Device Key
You can assign a component to a mode key that has a different label. For example, you can assign a
second TV to the AUX key.
1.
Begin the programming process as described earlier. (i.e. Press and hold the "AUX" key and then
press the "Mute" key. Then release both keys.)
2.
Press the device key associated with the type of device you wish to assign to the AUX key.
3.
Establish the correct code, either by scanning or direct code entry.
4.
Press the "AUX" key to store the code onto the "AUX" key
P 9-5
AGE