Table of Contents
Advertisement
MITSUBISHI BRAND DIRECTV PLUS™ DIGITAL SATELLITE RECEIVER
into a standby mode which enables it to continue monitoring data sent from DIRECTV, call in status
reports to DIRECTV, start and stop your VCR for programs you have scheduled, receive messages,
and perform other background activities. The only apparent changes occurring in the standby mode are
that the video goes black, the IN FROM ANTENNA connector signals are passed through to the OUT
TO TV connector, and the power light is off.
There are three keys on your remote control that most people use frequently. They are the
,
, and
keys.
After you have established favorite channel lists, as described in the chapter "Digital Satellite
Receiver's Menu System," you will want to cycle through them quickly and easily. Do so by pressing
the
key. Each press will advance to the next list of channels. After stepping through the favorite
lists it will cycle back to "All Channels."
At any time, you can exit the on-screen guide by selecting Video in the Guide pop-up menu. An even
faster way is to press the
key.
The
key will switch between DIRECTV programming and local broadcasts.
Knowing these few keys should enable to navigate through almost every digital satellite receiver
feature and menu.
P
3-2
AGE
Advertisement
Table of Contents
