To Stop The Product; To Set The Product To Off; To Charge The Battery - Husqvarna Automower 520 Operator's Manual

4.4.1 Park until further notice
Park means that the product goes
The operation mode
back to the charging station where it stays until a new
operation mode is selected and the START button is
pushed.
4.4.2 Start on next schedule
The product goes back to the charging station where it
stays until the next schedule setting let the product to
operate. Use the operation selection to stop operation
temporary, for example for irrigation or for games on the
lawn.
4.4.3 Parking duration
The product goes back to the charging station and
stays for the selected park duration. Use the operation
selection to temporary stop an ongoing mowing cycle
and let the product to stay in the charging station.
4.4.4 The charging station's park button
The PARK button on the charging station is used to
call the product back to the charging station.
®
the Automower Connect app offers the same function.
The PARK button on the charging station is useful for
instance when the product operates in a large work
area and the operator does not have access to the
®
Automower Connect app.
An LED in the PARK button is lit when the button
has been pressed. The LED diode goes out when the
product is parked in the charging station.
The product stays in the charging station until
®
the Automower Connect app is activated.
4.4.5 Operating mode - Pause
Pause in the Automower
When selecting
the product stop the current activity and pause. The
product is paused until either
®
in the Automower Connect app.
30 - Operation
Park in
Start in
®
Connect app,
Park or Start is selected

4.5 To stop the product

1. Push the STOP button to make the product and
the cutting motor stop.

4.6 To set the product to OFF

1. Push the STOP button.
2. Set the Main switch to the

4.7 To charge the battery

When the product is new or after long-term storage, the
battery can be empty. Charge the battery before you
start the product.
1. Set the Main switch to the
2. Put the product into the charging station until the
charging plates touch the contact plates.
3. Do a check that the product charges in the
®
Automower Connect app.
0 position.
1 position.
1439 - 015 - 23.11.2022