Husqvarna Automower 520 Operator's Manual page 23

should be used to minimize wear on the grass and to the
product.
The table shows the approximate number of hours the
product must operate each day for a specified area
dimension.
Area Automower
520
2
500 m /0.12 acre 7
2
1000 m /0.25 acre 14
2
1500 m /0.37 acre 22
2
2000 m /0.5 acre
2500 m 2 /0.62 acre
2
3000 m /0.75 acre
2
3500 m /0.86 acre
There are 3 different quality levels that you can select
which decides the cutting frequency:
• Pro sport quality: Used for premium sports fields
or golf courses that are cut everyday at low cutting
height. For a well-managed, lush, and dense turf.
• Pro quality: Used for sports fields and golf courses
at medium ambition level. Also used for facilities
with high demands on grass quality with medium
grass height and normal dense quality of turf.
• Regular quality: Used for green spaces with lower
demands. This means areas with less grass
growth, high cutting height and normal to low
dense quality of turf.
Quality
Pro sport quality
Pro quality
Regular quality
3.11.1.1 To edit the schedule settings
Settings > Schedule > Edit in the app.
1. Select
2. Select the pencil symbol in the app.
3. Select which days of the week and hours the
product must operate.
Save .
4. Select
3.11.1.2 To add a new schedule setting
Settings > Schedule > Edit in the app.
1. Select
2. Select the plus sign in the app.
3. Select which days of the week and hours the
product must operate.
Save .
4. Select
1439 - 015 - 23.11.2022
® Automower ®
550
3.5
7
10.5
14
17.5
21
24
Operation frequency
Each day
Each second day
Each third day
3.11.2 Cutting height
3.11.2.1 Adjust the cutting height
The cutting height can be varied from MIN (2 cm / 0.8
in.) to MAX (6 cm / 2.5 in.).
Note:
During the first week after a new installation, the
cutting height must be set to MAX to avoid damaging the
loop wire. After this, the cutting height can be lowered
step by step every second week until the desired cutting
height has been reached.
To adjust the cutting height with Automower
The cutting height can be adjusted from MIN to MAX
Settings > Cutting height .
1. Select
2. Move the horizontal bar to set the cutting height.
3. Select Save .
TargetHeight
Use the TargetHeight function to lower the cutting height
from MAX to the specified cutting height gradually during
10 days. If you change the cutting height manually
during this time it will disable the TargetHeight function.
To set the TargetHeight
1. Select Settings > Cutting height .
2. Select on/off to enable or disable the
function.
Save .
3. Select
3.11.3 Operation
In the Operation's menu it is possible to change the
Weather timer, ECO mode and Spiral
settings of the
cutting .
3.11.3.1 Spiral cutting
If the product enters an area where it senses the grass
is longer than average, it can change the movement
pattern to Spiral cutting . This means that the product
mows in a spiral pattern to faster cut the area with
longer grass. It is possible to set the intensity of the
Spiral cutting . Very low / Low intensity means that Spiral
cutting begins less often. High / Very high intensity
Spiral cutting begins more often.
means that
®
Connect
TargetHeight
Installation - 23