Malfunctions - Bosch WAN282H2 User Manual And Installation Instructions

en Troubleshooting
Fault
"E:36 / -10"
"E:36 / -25 / -26"
⁠
"E:35 / -10"
⁠ lights up.
⁠ flashes.
All other error codes.

Malfunctions

Fault
The appliance is not work-
ing.
46
Cause
Unapproved extension in-
stalled on the water drain
hose.
Drain pump is blocked.
The water pressure is low.
The filter in the water inflow
is blocked.
The tap is turned off.
The water inlet hose is
kinked or jammed.
There is water in the base
trough.
The appliance is leaking.
The temperature is too high.
Water level is too high.
Laundry is caught in the
door.
Door is not closed.
Malfunction
Cause
The mains plug of the power
cord is not plugged in.
Troubleshooting
Remove any unapproved exten-
▶
sions from the water hose. Connect-
ing the appliance
→ "Cleaning the drain pump",
▶
Page 41
No remedial action possible.
"Clean the water inflow filter"
▶
→ Page 44.
Turn on the tap.
▶
Ensure that the water inlet hose is
▶
not kinked or jammed.
Turn off the water tap.
▶
Call the after-sales service.
▶
→ "Customer Service", Page 55
Turn off the water tap.
▶
Call the after-sales service.
▶
→ "Customer Service", Page 55
Wait until the temperature has
▶
dropped.
→ "Cancelling the programme",
▶
Page 36
Start the Abpumpen programme.
▶
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press Start / Nachlegen / Pause
4.
to start the programme.
Close the door.
1.
Press Start / Nachlegen / Pause
2.
to start the programme.
Call the after-sales service.
▶
→ "Customer Service", Page 55
Troubleshooting
Connect the appliance to the power
▶
supply.