Table of Contents
Advertisement
Connecting the appliance
Connect your appliance to the power
supply, water inlet and water outlet.
Connecting the water inlet hose
Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
WARNING
Risk of electric shock!
The appliance contains live parts.
Touching live parts is dangerous.
Do not immerse the electrical
▶
AquaStop valve in water.
Connect the water inlet hose to a
1.
tap (26.4 mm = 3/4").
Open the water tap carefully and
2.
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
¾˝
min.
10 mm
min.
17 mm
Installation and connection en
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
Secure the water outlet hose
▶
against unintentional loosening.
Drainage into a si-
phon.
Secure the connec-
tion point with a (24–
40 mm) hose clamp.
Drainage into a wash
basin.
Fix and secure the wa-
ter outlet hose with an
"elbow" → Page 29.
Drainage into a plastic
pipe with rubber
sleeve.
Fix and secure the wa-
ter outlet hose with an
"elbow" → Page 29.
Connecting the appliance to the
electricity supply
Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
Insert the mains plug of the appli-
1.
ance's power cable in a socket
nearby.
The connection details of the appli-
ance can be found under "Tech-
nical data" → Page 57.
Check the mains plug is inserted
2.
properly.
17
Advertisement
Table of Contents
