Brother QL-1100c User Manual page 124

Troubleshooting
Problem
Unable to reset an error
I want to reset the Label Printer.
After exiting P-touch Editor Lite, how
do I restart the program while the
Label Printer is still on?
Solution
To reset an error:
1 Open the DK Roll Compartment Cover, and then close it.
2 If the error is not reset, press the Cutter (
3 If the error is not reset, turn off the Label Printer, and then turn it on again.
4 If the error is not reset, contact Brother Customer Service.
You can reset the Label Printer using the Printer Setting Tool from a computer.
For more information, see Change the Label Printer Settings on page 19.
You can reset the Label Printer using the Printer buttons.
For more information, see Reset All Settings to the Factory Settings Using the
Label Printer Buttons on page 107.
There are three ways to restart the application:
• Turn off the Label Printer and then turn it on again.
• Disconnect and then reconnect the USB Cable while the Label Printer is On.
• Launch P-touch Editor Lite from My Computer.
) Button.
16
116