Table of Contents
Advertisement
Menu operation
As one of the two types of MENU display, following QUICK MENU appears on the screen when pressing MENU button on the remote control. In
addition, DETAIL MENU (See page 18) appears when selecting DETAIL MENU in this MENU and pressing ENTER button.
•
Comparing QUICK MENU with DETAIL MENU, if the contents in those two menus are same each other, the functions in those two menus are
same as well.
•
To close QUICK MENU or DETAIL MENU, press MENU button when MENU is displayed.
QUICK MENU
* Menus are not displayed when no signal is supplied to the projector.
QUICK MENU
INFORMATION
*1 Not available with certain signals
*2 Not available when the input signal is from the VIDEO IN or S-VIDEO IN terminal.
QUICK MENU Basic operation
Several settings can be adjusted using the menu.
Example : Contrast setting
1.
Press the MENU button.
QUICK MENU
2.
Press the ENTER button (or
QUICK MENU
COLOR
ENHANCER
EN-16
COLOR ENHANCER
CONTRAST
BRIGHTNESS
COLOR TEMP.
SHARPNESS *1
LAMP MODE
ASPECT
NORMAL, 16:9, FULL
USER MENU
SELECT USER MENU
DETAIL MENU
LAMP TIME (LOW)
INPUT
RESOLUTION
VERTICAL FREQUENCY
HORIZONTAL FREQUENCY
SYNC. TYPE *2
button).
AUTO
AUTO
PRESENTATION
STANDARD
THEATER
USER
±30
±30
STANDARD
LOW
HIGH
USER
±5
STANDARD, LOW
COLOR
TINT
CLOSED CAPTION
WALL SCREEN
STANDBY MODE
AUDIO INPUT
IMAGE REVERSE
MENU POSITION
CINEMA MODE
WXGA
LANGUAGE
OK
3.
Press the
CONTRAST
4.
Press the
CONTRAST
5.
Exit the menu by pressing the MENU button several times.
Important:
•
When the button doesn't function, unplug the power cord from the
wall outlet. Wait about 10 minutes, plug the power cord in, and try
again.
•
After selecting the items marked with
ton.
or
button to select CONTRAST.
0
or
button to adjust the contrast.
+10
, press the ENTER but-
Advertisement
Table of Contents
