Advertisement
Ready To Go
Dello SimpleSpec 200.86
Installation
6
Attach the Panel cont..
c
Critical Tensioning Step!
Wait to re-tension the cables as weight of the panel is
applied. Re-tension the cables, pulling excess cable
through the tensioner, and tighten using Allen wrench
through tensioner as shown in 6c.
For more information, please visit 3-form.com or call 800.726.0126
June 2019 | MAn-RTG-200-08 | ReV 002 © 2019 3form, Inc. All rights reserved.
tm
Installation Manual
d
Tighten set screws on lower side brackets once cables
have been tensioned. This will prevent gapping in
tension on the cables.
4"
1 4
Advertisement
