Related Manuals for 3form SimpleSpec 200.37-Edge
Summary of Contents for 3form SimpleSpec 200.37-Edge
- Page 1 Ready To Go SimpleSpec 200.37-Edge Installation Manual For more information, please visit 3-form.com or call 800.726.0126 December 2020 | mAN-rTG-200-37 | reV 003 © 2020 3form, Inc. All rights reserved.
-
Page 2: Contents Overview
Suspend Anchoring KIT Wood Insert bolt Anchor Anchor rod, 50mm rod, 25mm 3-15-7000-K 3-15-0791 3-15-0734 3-15-3011A 3-15-3032A 3-15-1754 For more information, please visit 3-form.com or call 800.726.0126 December 2020 | mAN-rTG-200-37 | reV 003 © 2020 3form, Inc. All rights reserved. - Page 3 Fin Depth 16.5" (420mm) max Fin Depth 16.5" (420mm) max Fin Depth 16.5" (420mm) 1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1 1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1 1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1 For more information, please visit 3-form.com or call 800.726.0126 December 2020 | mAN-rTG-200-37 | reV 003 © 2020 3form, Inc. All rights reserved.
- Page 4 Follow proper fin numbering sequence as noted on page 3. Drill 1/8" holes through "c" shaped rails to hang the rails with cables. For more information, please visit 3-form.com or call 800.726.0126 December 2020 | mAN-rTG-200-37 | reV 003 © 2020 3form, Inc. All rights reserved.
- Page 5 After completing installation, the fast caps (3-7-6) can be used to cover up the bolts. Bottom of Fin For more information, please visit 3-form.com or call 800.726.0126 December 2020 | mAN-rTG-200-37 | reV 003 © 2020 3form, Inc. All rights reserved.
- Page 6 Cable Couplers and Tensioners Position and Installation When installing models end to end (meaning the ends of the fins are lining up) 3form recommends to leave a 1/2" - 1" gap between modules to avoid any aesthetic variation due to the fins not perfectly aligning caused by material or installation variance.
- Page 7 Drill Ø7/16" (Ø11.1mm) hole, minimum Use an Allen wrench to install the m8 20mm deep. Threaded Insert (3-15-791). For more information, please visit 3-form.com or call 800.726.0126 December 2020 | mAN-rTG-200-37 | reV 003 © 2020 3form, Inc. All rights reserved.
- Page 8 Ready To Go SimpleSpec 200.37-Edge Installation Manual Installation Cable Couplers and Tensioners Position and Installation cont... " For more information, please visit 3-form.com or call 800.726.0126 December 2020 | mAN-rTG-200-37 | reV 003 © 2020 3form, Inc. All rights reserved.
- Page 9 Ready To Go SimpleSpec 200.37-Edge Installation Manual Installation Suspend Edge Module Cable Tensioner installation For more information, please visit 3-form.com or call 800.726.0126 December 2020 | mAN-rTG-200-37 | reV 003 © 2020 3form, Inc. All rights reserved.
- Page 10 Ready To Go SimpleSpec 200.37-Edge Installation Manual Installation Connect Edge Module - Optional For more information, please visit 3-form.com or call 800.726.0126 December 2020 | mAN-rTG-200-37 | reV 003 © 2020 3form, Inc. All rights reserved.
-
Page 11: Spec Sheet
Nightfall Zinc ASTm e84-3 Sola Felt Flame Spread, 1/4" thickness 1 class A: -25 Smoke Generated ≤45 For more information, please visit 3-form.com or call 800.726.0126 December 2020 | mAN-rTG-200-37 | reV 003 © 2020 3form, Inc. All rights reserved. -
Page 12: Cleaning Instructions
For more information, please visit 3-form.com or call 800.726.0126 December 2020 | mAN-rTG-200-37 | reV 003 © 2020 3form, Inc. All rights reserved.
Need help?
Do you have a question about the SimpleSpec 200.37-Edge and is the answer not in the manual?
Questions and answers