Related Manuals for 3form Edge SimpleSpec 300.31
Summary of Contents for 3form Edge SimpleSpec 300.31
- Page 1 Edge SimpleSpec 300.31 Installation Manual For more information, please visit 3-form.com or call 800.726.0126 June 2021 | MAn-RTG-300-31 | ReV 005 © 2021 3form, Inc. All rights reserved.
-
Page 2: Contents Overview
3-7-18 3-7-20 3-7-19 *Pre-installed in Rail (3-70-014) Required Tools Drill Drill Bits Tape Measure Level Tool Screwdrivers For more information, please visit 3-form.com or call 800.726.0126 June 2021 | MAn-RTG-300-31 | ReV 005 © 2021 3form, Inc. All rights reserved. - Page 3 Configuration B Configuration B 13.14.15.16.1.2.3.4.5.6.7.8.9.1.11.12 1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1. Configuration A Configuration C Configuration A Configuration C 1.2.3.4.5.6.7.8.9.1.11.12.13.14.15.16 4.15.3.12.1.6.7.13.16.2.14.5.9.11.8.1 4.3.2.1.1.2.3.4.5.6.7.8.8.7.6.5. 8.7.6.5.4.3.2.1.1.2.3.4.5.6.7.8. For more information, please visit 3-form.com or call 800.726.0126 June 2021 | MAn-RTG-300-31 | ReV 005 © 2021 3form, Inc. All rights reserved.
- Page 4 Configuration A Configuration A Configuration A 1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1 1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1 1.2.3.4.5.6.7.8.8.7.6.5.4.3.2.1 Configuration B Configuration B Configuration B 8.7.6.5.4.3.2.1.1.2.3.4.5.6.7.8 8.7.6.5.4.3.2.1.1.2.3.4.5.6.7.8 8.7.6.5.4.3.2.1.1.2.3.4.5.6.7.8 For more information, please visit 3-form.com or call 800.726.0126 June 2021 | MAn-RTG-300-31 | ReV 005 © 2021 3form, Inc. All rights reserved.
- Page 5 View from Side Install Edge Fins into Installation Stands Follow proper fin numbering sequence as noted on pages 3-4. For more information, please visit 3-form.com or call 800.726.0126 June 2021 | MAn-RTG-300-31 | ReV 005 © 2021 3form, Inc. All rights reserved.
- Page 6 Then install bolts (3-7-19) into the rails in the pre-installed rampa inserts. Expand Rails to Lock Fins in Slots For more information, please visit 3-form.com or call 800.726.0126 June 2021 | MAn-RTG-300-31 | ReV 005 © 2021 3form, Inc. All rights reserved.
- Page 7 Mark Walls for Wall Bracket Installation When installing models end to end (meaning the ends of the fins are lining up) 3form recommends to leave a 1/2" - 1" gap between modules to avoid any aesthetic variation due to the fins not perfectly aligning caused by material or installation variance.
- Page 8 Attach Rail Brackets to Back of Edge Rail Center Rail Brackets around largest holes on back of edge rail For more information, please visit 3-form.com or call 800.726.0126 June 2021 | MAn-RTG-300-31 | ReV 005 © 2021 3form, Inc. All rights reserved.
- Page 9 For more information, please visit 3-form.com or call 800.726.0126 June 2021 | MAn-RTG-300-31 | ReV 005 © 2021 3form, Inc. All rights reserved.
- Page 10 3/8" (9.5mm) • Next drill all the way through with a 1/4" diameter brad point drill bit For more information, please visit 3-form.com or call 800.726.0126 June 2021 | MAn-RTG-300-31 | ReV 005 © 2021 3form, Inc. All rights reserved.
-
Page 11: Product Description And Specifications
Sola Felt 1/4" (6.3mm) .3 lb/ft (1.46 kg/m For more information, please visit 3-form.com or call 800.726.0126 June 2021 | MAn-RTG-300-31 | ReV 005 © 2021 3form, Inc. All rights reserved. -
Page 12: Usage Limitations
• use highly alkaline or abrasive cleaning agents. • Rub with a dry cloth. For more information, please visit 3-form.com or call 800.726.0126 June 2021 | MAn-RTG-300-31 | ReV 005 © 2021 3form, Inc. All rights reserved.
Need help?
Do you have a question about the Edge SimpleSpec 300.31 and is the answer not in the manual?
Questions and answers