waratah FL85 Operator's Manual page 63

• •
1K
The chain lubrication
system malfunctions
• •
1L
There is oil leaking
from the saw
• •
1M
The saw bar does not
travel as it should
Miscellaneous: Operational checks
The lubrication oil tank is empty.
Check to see if the valve on the lubrication pump is leaking.
The lubrication system's hydraulic hose is broken.
The swivel seal-rings are damaged.
The saw is damaged.
The swivel seal-rings are damaged.
The tensioning piston's O-rings are damaged.
The saw-box is jammed with debris.
The travel pressure is too low.
The piston seals in the travel cylinder are damaged.
4-2-4
YES: Clean or replace the
check-valves.
YES: Refill the lubrication
oil tank.
YES: Replace the hose.
NO: Perform the next
check.
NO: Perform the next
check.
YES: Replace all the
seal-rings.
NO: Perform the next
check.
NO: Contact your local
authorised dealer.
AM24480,0000361 -19-06SEP21-13/15
YES: Replace all the
swivel seal-rings.
YES: Replace the
damaged parts.
YES: Replace the piston
O-rings.
NO: Perform the next
check.
NO: Perform the next
check.
NO: Contact your local
authorised dealer.
AM24480,0000361 -19-06SEP21-14/15
YES: Adjust the travel
pressure.
YES: Clean debris from
the saw-box.
YES: Replace the piston
seals.
NO: Perform the next
check.
NO: Perform the next
check.
NO: Contact your local
authorised dealer.
AM24480,0000361 -19-06SEP21-15/15
090621
PN=63