waratah FL85 Operator's Manual page 61

• •
1D
There is a lubrication
malfunction
• •
1E
It is difficult to adjust
the saw tension
pressure
• •
1F
The felling head
drops a load
unexpectedly
• •
1G
The felling head will
not stay in the 'tilt-up'
position
Miscellaneous: Operational checks
The filler-cap's check-valve is damaged.
The accumulator in the saw motor's case-drain circuit is damaged.
The hydraulic pressure is too low.
One or more of the hydraulic hoses are broken.
There is a problem with the cylinder.
The hydraulic pressure is too low.
One or more of the hydraulic hoses are broken.
There is a problem with the cylinder.
Continued on next page
4-2-2
YES: Clean or replace the
filler-cap.
NO: Contact your local
authorised dealer.
AM24480,0000361 -19-06SEP21-6/15
YES: Replace the
accumulator.
NO: Contact your local
authorised dealer.
AM24480,0000361 -19-06SEP21-7/15
YES: Replace the hose(s)
as needed.
YES: Check the hydraulic
pressure.
YES: Check the
piston-seal.
NO: Perform the next
check.
NO: Perform the next
check.
NO: Contact your local
authorised dealer.
AM24480,0000361 -19-06SEP21-8/15
YES: Replace the hose(s)
as needed.
YES: Check the hydraulic
pressure.
YES: Check the
piston-seal.
NO: Perform the next
check.
NO: Perform the next
check.
NO: Contact your local
authorised dealer.
AM24480,0000361 -19-06SEP21-9/15
090621
PN=61