Removal Of On/Off Switch (With Fuse And Capacitor); Moter Assy(With Motor Support Cover And Motor Case) - Panasonic MC-CJ903-R747 Service Manual

4.5. Removal of ON/OFF Switch
(with Fuse and Capacitor)
1. Remove the Fuse Unit and the ON/OFF Switch from the
Motor Support Cover Unit.
2. Remove the Capacitor.
Fig.11
Fig.12
4.6. Moter Assy(with motor support
cover and motor case)
1. Remove the Motor Assy from the Lower Body Unit.
2. Pinch the stopper of the Motor Case Unit with needle-
nose pliers as shown in the figure below and remove the
Power Control Unit.
9
Fig.13
Fig.14