Removal Of On/Off Switch (With Fuse And Capacitor); Motor Assy (With Motor Support Cover And Motor Case) - Panasonic MC-CJ907-W747 Service Manual

4.5. Removal of ON/OFF Switch
(with Fuse and Capacitor)
1. Remove the Fuse Unit and the ON/OFF Switch from the
Motor Support Cover Unit.
2. Remove the Capacitor.
Fig.11
Fig.12
4.6. Motor Assy (with motor sup-
port cover and motor case)
1. Remove the Motor Assy from the Lower Body Unit.
2. Pinch the stopper of the Motor Case Unit with needle-
nose pliers as shown in the figure below and remove the
Power Control Unit.
10
Fig.13
Fig.14