Winbond W91550DN Series Manual

13-memory tone/pulse dialer with lcd and lock functions

Advertisement

Quick Links

GENERAL DESCRIPTION
The W91550DN series are Si-gate CMOS IC tone/pulse switchable dialers containing 13 number
memories and a 10-digit LCD driver for displaying telephone numbers and calling time, including a
16-digit × 3 one-touch memory, 16-digit × 10 two-touch memory dialing, and 32-digit × 2 redial and
save memory. These dialers also provide a secrecy key, flash, two-way handfree dialing, one-key
redial, hold and lock functions.
FEATURES
Tone/pulse switchable dialer
Two by 32-digit redial and save memory (or mercury memory)
Three by 16-digit one-touch direct repertory memory
Ten by 16-digit two-touch indirect repertory memory
Memory check function
Save/mercury function selected by pin option
Typical interdigit pause (IDP): 800 msec (10 ppS) in pulse mode
Uses 4 × 7 keyboard
Mute key for secrecy control
Minimum tone output duration/inter-tone pause: 87/87 mS
Flash pause time: 1.2 sec.
Flash break time (98, 300, 600 msec) selectable by keypad
Pause time (2.0, 3.6, 4.0 sec.) selectable by mask option
Pulse-to-tone (*/T) keypad for long distance call operation
0 or 9 dialing inhibition pin for PABX system or long distance dialing lock out
Make/break ratio selected by pin option
Built-in 10-digit LCD driver for telephone number display and calling time (1/3 duty, 1/2 bias)
Built-in calling time from (00:00) to (59:59)
On-chip power-on reset and clear LCD
On hook debounce: 250 msec in normal mode (20 msec in lock mode)
First key-in delay: 300 msec in lock mode
Uses 3.579545 MHz crystal or ceramic resonator
Packaged in 64-pin QFP
The different dialers in the W91550DN series are shown in the following table:
TYPE NO.
W91550DNF
Default pause time is 3.6 sec. and all F1, F2, F3 are first priority.
W91550DNF-1
Same as W91550DN except F3 can be stored as a digit.
W91550DNH
Default pause time is 3.6 sec. and all F1, F2, F3 are first priority.
W91550DNH-1
Same as W91550DN except F3 can be stored as a digit.
13-MEMORY TONE/PULSE DIALER
WITH LCD AND LOCK FUNCTIONS
FUNCTION
- 1 -
W91550DN SERIES
Publication Release Date: November 1998
PACKAGE
QFP
QFP
Chip
Chip
Revision A3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the W91550DN Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Winbond W91550DN Series

  • Page 1 WITH LCD AND LOCK FUNCTIONS GENERAL DESCRIPTION The W91550DN series are Si-gate CMOS IC tone/pulse switchable dialers containing 13 number memories and a 10-digit LCD driver for displaying telephone numbers and calling time, including a 16-digit × 3 one-touch memory, 16-digit × 10 two-touch memory dialing, and 32-digit × 2 redial and save memory.
  • Page 2: Pin Configuration

    W91550DN SERIES PIN CONFIGURATION NAME NAME NAME NAME KMUTE COM3 DTMF TEST HPM MUTE T/P MUTE S/ M MODE COM1 COM2 LOCK - 2 -...
  • Page 3: Pin Description

    W91550DN SERIES PIN DESCRIPTION SYMBOL FUNCTION The keyboard input may be used with either the standard 4 × 7 Column, 44−49 keyboard, an inexpensive single contact (form A) keyboard or & electronic input. Inputs 50−53 A valid key entry is defined by a single row being connected to a single column.
  • Page 4 W91550DN SERIES Pin Description, continued SYMBOL FUNCTION DTMF In pulse mode, this pin remains in low state at all times. In tone mode, it will output a dual or single tone. A detailed timing diagram for tone mode is shown in Figure 2(a), 2(b), 2(c) 2(d).
  • Page 5 W91550DN SERIES Pin Description, continued SYMBOL FUNCTION 57, 58 I, O Handfree control pins. A low pulse on the HFI input pin toggles the HFI , HFO handfree control state. Status of the handfree control is listed in the following table:...
  • Page 6: Block Diagram

    W91550DN SERIES Pin Description, continued SYMBOL FUNCTION 62, 63, 2 COM1− COM1−COM3 are common signal output terminals for the 1/3 duty COM3 LCD. 1(A, B, C) −10(A, B, C) are 10-digit segment signal output terminals. 1(A, B, C)− 3−33 10(A, B, C)
  • Page 7: Functional Description

    W91550DN SERIES FUNCTIONAL DESCRIPTION Keyboard Operation MUTE ∗/T ∗SAVE • E: Store digit • CHK: a. Check dialing number b. Memory check (except mercury) • A: Indirect repertory memory dialing function key • R/P: Redial and pause function key ∗/T: ∗ in tone mode and P→T in pulse mode •...
  • Page 8 W91550DN SERIES a. The key can execute the redial function only as the first key-in after off-hook; otherwise, it will invoke the pause function. b. The redial memory content will be D1, D2, D3, ..., Dn. c. If redialing length oversteps 32 digits, the redialing function will be inhibited.
  • Page 9 W91550DN SERIES D1', D2', ..., Dn' will be stored in save memory but will not be dialed out. HFI ¡õ & OFF HOOK , (or ON HOOK , D2 , ..., , SAVE a. D1, D2, ..., Dn will be dialed out before the SAVE key is pressed.
  • Page 10 W91550DN SERIES Access Pause & HFI ¡õ OFF HOOK ON HOOK , ..., 1. The pause function can be stored in memory. 2. The pause function is executed in normal dialing, redialing, or memory dialing. 3. The pause function timing diagram is shown in Figure 6.
  • Page 11 W91550DN SERIES Mute & HFI ¡õ OFF HOOK , (or ON HOOK MUTE The MUTE is switched on and off by the mute key. The function timing diagram is shown in Figure 9. Hold Key & HFI ¡õ OFF HOOK...
  • Page 12: Absolute Maximum Ratings

    W91550DN SERIES 4. If ON HOOK OFF HOOK R is entered, then the mixed dialing sequence described in the above examples will be dialed out only if the total number of digits does not exceed 32. If the total exceeds 32 digits, then redialing is inhibited.
  • Page 13 W91550DN SERIES DC Characteristics, continued PARAMETER SYM. CONDITIONS MIN. TYP. MAX. UNIT DTMF Output Voltage mVrms Row group, R = 5 KΩ Pre-emphasis Col/Row, V = 2.0−5.5V DTMF Distortion = 5 KΩ, = 2.0−5.5V DTMF Output DC Level = 5 KΩ, = 2.0−5.5V...
  • Page 14 W91550DN SERIES AC CHARACTERISTICS PARAMETER SYM. CONDITIONS MIN. TYP. MAX. UNIT Key-in Debounce Key Release Debounce Off-hook Delay Lock only First Key-in Delay Lock only On-hook Debounce Normal mode Lock mode Pulse Mute Delay B/M = V B/M = V 33.3...
  • Page 15: Lcd Display Format

    W91550DN SERIES LCD DISPLAY FORMAT A. Normal Dialing Off hook (or press " HFI " switch) (Here tone mode was selected). Blinking Dial "0123456789" and "56". Note: In tone mode the tone mark (the dot of digit_9) will be lit.
  • Page 16: Memory Check

    W91550DN SERIES D. Abbreviated Auto Dialing Press the "A" key (L5 = "770066") in handset mode. Press the "5" key. E. Memory Check Off hook or press the " HFI " switch (In which case the handfree mode is selected, and M3 = "035P770066").
  • Page 17: Timer Function

    W91550DN SERIES Continued "M1" key. (Display 1−10 digits) Blinking "Any key" except "F1", "F2" and "F3" keys. (Display 11−16 digits) F. Timer Function Off hook (or press " HFI " switch), then press the "TIM" key. (Display last calling time) "774926"...
  • Page 18 W91550DN SERIES Continued After dialing "774926" press the "TIM" key. (Timer will start counting up) Press the "CHK" key. (M3 = "035P770066") Press the "M3" key. The system will return to timer mode after 6 seconds. (Timer counts up continuously) Press the "F1", "F2"...
  • Page 19 W91550DN SERIES LCD PATTERN FOR DATA CHECK Dailing/Icon1 Tone/Icon9 Flash/Icon5 Mercury/Icon10 Hold/Icon6 In use/Icon2 Handfree/Icon7 Pause/Icon3 Timer/Icon8 Mute/Icon4 Notes: 1. The icon1 to icon10 are controlled by function operation. 2. The "In use/Icon2" always blinks after power on. Publication Release Date: November 1997...
  • Page 20 W91550DN SERIES LCD PANEL PATTERN (SEG) (COM) - 20 -...
  • Page 21: Timing Waveforms

    W91550DN SERIES TIMING WAVEFORMS < 600mS < 300mS KEY IN T/P MUTE HPM MUTE DTMF OSCILLATION OSC. Figure 1(a). Normal Dialing Timing Diagram (Pulse Mode without Lock Function) < 600mS < 300mS KEY IN T/P MUTE HPM MUTE DTMF OSCILLATION OSC.
  • Page 22 W91550DN SERIES Timing Waveforms, continued < 600mS KEY IN T/P MUTE HPM MUTE DTMF OSCILLATION OSC. Figure 1(c). Auto Dialing Timing Diagram (Pulse Mode without Lock Function) < 600mS KEY IN T/P MUTE HPM MUTE DTMF OSCILLATION OSC. Figure 1(d). Auto Dialing Timing Diagram (Pulse Mode with Lock Function)
  • Page 23 W91550DN SERIES Timing Waveforms, continued < 600mS < 300mS KEY IN DTMF T/P MUTE HPM MUTE High OSC. OSCILLATION Figure 2(a). Normal Dialing Timing Diagram (Tone Mode without Lock Function) < 600mS < 300mS KEY IN DTMF T/P MUTE HPM MUTE High OSC.
  • Page 24 W91550DN SERIES Timing Waveforms, continued < 600mS KEY IN DTMF T/P MUTE HPM MUTE High OSC. OSCILLATION Figure 2(c). Auto Dialing Timing Diagram (Tone Mode without Lock Function) < 600mS KEY IN DTMF T/P MUTE 300mS HPM MUTE High OSC.
  • Page 25 W91550DN SERIES Timing Waveforms, continued KEY IN T/P MUTE HPM MUTE DTMF OSCILLATION OSC. Figure 3. One-key Redial Timing Diagram T/P MUTE High HPM MUTE OSC. OSC. OSC. OSC. Figure 4. Handfree Timing Diagram Publication Release Date: November 1997 - 25 -...
  • Page 26 W91550DN SERIES Timing Waveforms, continued KEY IN T/P MUTE HPM MUTE DTMF OSC. OSCILLATION Figure 5. Mercury Function Timing Diagram KEY IN T/P MUTE HPM MUTE DTMF OSC. OSCILLATION Figure 6. Pause Function Timing Diagram (Pulse Mode) - 26 -...
  • Page 27 W91550DN SERIES Timing Waveforms, continued KEY IN T/P MUTE HPM MUTE DTMF OSC. OSCILLATION Figure 7. Pulse-to-tone Timing Diagram KEY IN T/P MUTE HPM MUTE DTMF OSCILLATION OSC. Figure 8. First Priority Flash Timing Diagram Publication Release Date: November 1997...
  • Page 28 W91550DN SERIES Timing Waveforms, continued MUTE MUTE KEY IN T/P MUTE HPM MUTE KMUTE OSC. OSCILLATION Figure 9. Mute Timing Diagram ON HOOK OFF HOOK HOLD KEY T/P MUTE High HPM MUTE CHIP ENBLE Figure 10(a). Hold Timing Diagram Note: The HOLD KEY cannot be enabled when the chip is disabled.
  • Page 29 W91550DN SERIES Timing Waveforms, continued OFF HOOK HOLD KEY High T/P MUTE HPM MUTE CHIP ENBLE Figure 10(b). Hold Timing Diagram Note: The HFI and HOLD KEY inputs will toggle the HFO signal; as soon as either HFI or HOLD KEY is activated, the HFO signal will go high and previous activated inputs will be ignored.
  • Page 30 W91550DN SERIES Timing Waveforms, continued < 300 mS KEY IN T/P MUTE HPM MUTE DTMF OSC. OSCILLATION Figure 11. First Key-in Delay Timing Diagram KEY IN T/P MUTE HPM MUTE DTMF OSC. OSCILLATION Figure 12. Flash Timing Diagram for the F3 Key of W91550DN-1...
  • Page 31 W91550DN SERIES BONDING PAD DIAGRAM (0, 0) Notes: 1. The substrate must be connected to V 2. The chip size is 3010.00 × 3060.00 µm Unit: µm NAME NAME -1234.60 1369.20 -1359.60 -1127.00 KMUTE COM3 -1374.60 1322.70 -1359.60 -1281.50 -1359.60 1052.80...
  • Page 32 1369.20 1333.60 1182.10 -1052.60 1369.20 LOCK Winbond Electronics (H.K.) Ltd. Winbond Electronics North America Corp. Headquarters Winbond Memory Lab. Rm. 803, World Trade Square, Tower II, No. 4, Creation Rd. III, 123 Hoi Bun Rd., Kwun Tong, Science-Based Industrial Park, Winbond Microelectronics Corp.

Table of Contents