Honeywell HVMV User Manual page 25

Camera Disconnected
Camera Alarm In
Camera Alarm Out
Some of the triggers require that you configure the settings on
the web page of NVR or local NVR. For example, the motion
Note
detection windows have to be manually configured on each
camera before they can be configured in the Event settings.
An event prompt will pop up on the screen when a triggering condition is met. For example, a
motion is detected, the sample prompt is shown below. The related video can be played back
by clicking on the video on the event prompt.
Figure 3-25 Event Prompt
System Event
Click and click Add Trigger as shown in
The network is abnormal.
The alarm in device connected to Camera is
triggered.
The alarm out device connected to Camera
is triggered.
Figure 3-22, the following figure is displayed:
Settings
21