Honeywell HVMV User Manual page 17

Figure 3-11 P2P
2. Enter the serial number and the admin user's password of NVR. Click Add and the devices
will be added in the devices list in the left pane, see
Adding Devices via IP/Domain
1. Click as shown in
Figure 3-12 Adding Devices via IP/Domain
2. Enter the IP/Domain name and the password of NVR. Click Add and the devices will be
added in the devices list in the left pane, see
Adding Devices via Auto Search
1. Click as shown in
network segment. After the search is completed, the following interface is displayed:
Figure 3-10 and the following interface is displayed:
Figure
Figure 3-10 , the system will search the devices in the same
Figure 3-16.
3-16.
Settings
13