Warranty card ....................................11 This user’s manual is a main operating document intended for technical, maintenance, and operating staff. The manual contains information about purpose, technical details, operating principle, design, and installation of the SHM 100 DK unit and all its modifications.
Page 3
SHM 100 DK www.blaubergventilatoren.de All user’s manual requirements as well as the provisions of all the applicable local and national construction, electrical, and technical norms and standards must be observed when installing and operating the unit. Disconnect the fan from power supply prior to any connection, servicing and repair operations.
SHM 100 DK www.blaubergventilatoren.de PURPOSE The ventilator is designed to ensure continuous mechanical air exchange in flats, cottages, hotels, cafés and other domestic and public premises. Designed for in-wall installation. In sunny weather, the ventilator provides ventilation due to the built-in fan, which is powered by a solar battery.
SHM 100 DK www.blaubergventilatoren.de TECHNICAL DATA The temperature in the room where the indoor unit of the ventilator is installed must be in the range from +5 °C to + 40 °C with relative humidity up to 65 % (no condensation build-up). If the conditions of using the ventilator exceed the specified limits, ensure the flow of fresh air through the windows.
SHM 100 DK www.blaubergventilatoren.de DESIGN AND OPERATING PRINCIPLE The ventilator consists of an internal grille, telescopic air duct, and external grille. The internal grille is made of high quality ABS plastic and is equipped with a dust filter (G3 class). The built-in regulator allows you to change the supply air volume or completely close the ventilation duct.
SHM 100 DK www.blaubergventilatoren.de MOUNTING AND SET-UP READ THE USER'S MANUAL BEFORE INSTALLING THE UNIT. BEFORE INSTALLING ADDITIONAL EXTERNAL DEVICES, READ THE RELEVANT USER MANUALS. DO NOT BLOCK THE AIR DUCT OF THE INSTALLED VENTILATOR WITH DUST ACCUMULATING MATERIALS, SUCH AS CURTAINS, CLOTH SHUTTERS, ETC.
Page 8
SHM 100 DK www.blaubergventilatoren.de 4. Install the internal grille. 5. Adjust the airflow regulator. Closed Open 6. Assemble the internal grille. ALL THE COMPONENTS OF THE UNIT ARE ITS INTEGRAL PARTS. MAINTAINING THE FACTORY CONFIGURATION AND FORM FACTOR IS ABSOLUTELY...
SHM 100 DK www.blaubergventilatoren.de TECHNICAL MAINTENANCE The technical maintenance includes periodic cleaning of the grille and solar battery surfaces from accumulated dust and dirt, as well as washing the built-in filter as it becomes dirty, but at least once every 6 months.
SHM 100 DK www.blaubergventilatoren.de MANUFACTURER’S WARRANTY The product is in compliance with EU norms and standards on low voltage guidelines and electromagnetic compatibility. We hereby declare that the product complies with the provisions of Electromagnetic Compatibility (EMC) Directive 2014/30/EU of the European Parliament and of the Council, Low Voltage Directive (LVD) 2014/35/EU of the European Parliament and of the Council and CE-marking Council Directive 93/68/EEC.
SHM 100 DK www.blaubergventilatoren.de CERTIFICATE OF ACCEPTANCE Unit Type Wall ventilator Model Serial Number Manufacture Date Quality Inspector’s Stamp SELLER INFORMATION Seller Address Phone Number E-mail Purchase Date This is to certify acceptance of the complete unit delivery with the user’s manual. The warranty terms are acknowledged and accepted.
Need help?
Do you have a question about the SHM 100 DK and is the answer not in the manual?
Questions and answers