Table of Contents
Advertisement
Maintenance
The
and
Finish at
not available with maintenance pro-
grammes.
Soak
Stubborn soiling can be soaked using
this maintenance programme.
Allow the oven compartment to cool
down.
Take all accessories out of the oven
compartment.
Remove coarse soiling with a cloth.
Select
Maintenance
The soaking process takes approx.
10 minutes.
Drying
This maintenance programme can be
used to dry any residual moisture in the
oven compartment, including in inac-
cessible areas.
Dry the oven compartment with a
cloth.
Select
Maintenance
The drying process takes approx.
20 minutes.
Rinsing
The water-carrying system is rinsed out
during this maintenance programme.
Any remaining food deposits are rinsed
away.
Select
Maintenance
Follow the instructions on the display.
Rinsing takes approx. 10 minutes.
functions are
Start at
|
Soak
.
|
.
Drying
|
Rinse
.
Cleaning and care
Descaling
We recommend using Miele descaling
tablets (see "Optional accessories") to
descale the appliance. These have
been specially developed for use with
Miele appliances to optimise the de-
scaling process. Other descaling
agents, which contain other acids be-
sides citric acid and/or other undesir-
able substances, such as chlorides for
example, could cause damage to the
product. Moreover, the descaling res-
ult required could not be guaranteed if
the descaling solution was not of the
appropriate concentration.
Do not spill descaling agent onto
metal surfaces. This can cause
marks to appear.
However, should any descaling
agent get onto these surfaces, wipe
it away immediately.
The combination steam oven has to be
descaled after a certain operating time.
When the time comes to descale the
steam oven, the number of cooking
processes remaining lights up on the
display. It only counts the number of
cooking processes that use steam. The
combination steam oven will be dis-
abled after the last remaining cooking
process.
We recommend descaling the combina-
tion steam oven before it is disabled.
Descaling takes approx. 41 minutes.
During the descaling process, the water
container must be rinsed out and re-
filled with fresh water. The condensate
container needs to be emptied.
159
Advertisement
Table of Contents
