Table of Contents
Advertisement
Problem solving guide
Problem
F94
F138
F190
168
Cause and remedy
The water inlet hose is trapped or kinked.
Rectify the cause of the problem and start the ap-
pliance again.
The water supply valve has not been opened.
Open the water supply valve and start the appli-
ance again.
One or both float switches in the water container are
stuck.
Release the float switches or switch so that it
moves freely.
If this fault message appears again after the prob-
lem(s) have been corrected, contact the Miele
Customer Service Department.
The combination steam oven is leaking. Water has
run into the floor tray.
Switch the combination steam oven off and back
on again.
If the fault message appears again, contact the
Miele Customer Service Department.
There is a fault with the water intake valve.
This fault can occur if the control panel is opened or
closed during the water inlet.
Confirm with OK and continue operation.
If the fault message appears again, contact the
Miele Customer Service Department.
Advertisement
Table of Contents
