Tilt In Space - Leckey Mygo Max User Manual

Mygo Max User Manual p33

12.7 TILT IN SPACE

The tilt in space can be angled while the
user is in the seat. Before you adjust the
tilt in space angle of the seat always
ensure the pelvic harness is secured
preventing the user from sliding forward
in the seat.
To adjust the tilt angle pull the lever
on the push handle. Once you have
selected the angle you require, by simply
removing your hand from the handle, the
chair will be locked in position.
Please use handle bars when
operating tilt in space.
Always check with your
therapist that the use of tilt
in space will not cause any
obstructions
A
12.8 CHEST AND TRUNK
HARNESS ADJUSTMENT
If the child requires chest support as part
of their postural support programme
the seat will be fitted with rigid laterals
or a combination of laterals, chest
harness and trunk harness. These may
need to be adjusted on a daily basis to
accommodate differences in clothing.
To change the width of the chest
harness, lift the front cover, adjust the
Velcro straps and set to the desired
width. When the correct width has been
achieved replace the cover.
Please refer to section 11.14 for specific
guidance on adjusting the trunk harness.
Always make sure the plastic
buckles are fully engaged
when using the chest harness.